Study tips

How to study engineering: problem practice that actually sticks

Engineering exams reward doing, not recognising. The students who struggle are often the ones who spent their time reading solutions that looked obvious at the time.

By the Ace team · November 11, 2026 · 4 min read

How to study engineering: problem practice that actually sticks — Ace blog

Short answer: study engineering by attempting problems from a blank page, not by reading worked solutions. Use worked examples to learn a new problem type, then close them and solve similar problems yourself. Mix problem types in your practice so you learn to spot which method a question needs, and test yourself on the underlying theory, not just the procedure. Spread practice over the term, because engineering topics build on each other.

Why engineering needs a different kind of studying

Most engineering exams ask you to solve problems you have not seen before, under time pressure. That is a skill, and skills come from practice, not from reading. A solution you follow line by line feels clear, but following is not the same as producing it.

The evidence on active learning in STEM is strong. Freeman and colleagues (2014) analysed 225 studies comparing traditional lecturing with active learning in undergraduate science, technology, engineering and maths courses. Exam scores improved by about 6% in active learning sections, and students in traditional lecture classes were 1.5 times more likely to fail. That research is about how courses are taught, but the lesson carries over to how you study: doing beats watching.

Stanford's Center for Teaching and Learning makes the same point from the student side. Two of its top ten misguided study techniques are relying on resources whenever you get stuck, and redoing problem sets without understanding the concepts behind them.

Use worked examples, then take them away

Worked examples are useful when a problem type is new. Sweller and Cooper (1985) found that algebra students who studied worked examples processed them faster than students solving conventional problems, then solved similar problems more quickly and with fewer errors. The catch: the benefit was specific to problems with the same structure.

So use them as a bridge, not a destination:

  1. Study one worked example closely. Explain each step to yourself before reading the next one. Why this equation? Why this assumption?
  2. Close it and solve a similar problem. No peeking until you have a full attempt.
  3. Compare and fix. Where did your attempt differ? Write the reason down.
  4. Redo the ones you got wrong from scratch a day or two later, without the solution open.

Getting stuck is part of it. Stanford's guide notes that "getting stuck is a normal part of problem-solving", and that working through it, by trying a different approach, is what builds the skill exams test.

Mix problem types instead of blocking them

Textbook problem sets usually follow the chapter: twenty problems on the same method. That makes practice easy, because you always know which method to use. Exams do not tell you.

Rohrer and Taylor (2007) tested this with college students learning to solve several types of maths problems. Students whose practice problems were randomly mixed did vastly better on a test a week later than students who practised each type in a block. In a second experiment, spreading practice of one problem type across sessions beat massing it into one. Our guide to interleaving explains why mixing works.

In practice: once you can do a problem type, add it to a mixed pile with earlier topics, and start each session with a few problems drawn from across the module.

Test the theory, not just the steps

Many engineering exams include short conceptual questions: why does this assumption hold, what happens to the output if this input doubles, which law applies here. Students who learned procedures by pattern-matching often lose marks there.

Turn your lecture notes into short questions on definitions, assumptions, units and relationships, and quiz yourself on them regularly. It takes less time than problems and catches gaps that make problems go wrong. Our guide to memorising formulas covers the equations side.

This is where Ace fits: it turns your lecture PDFs and slides into practice questions written only from that material, and for formula topics it can include an interactive simulation where you set the value. It does not replace working problem sets by hand; it covers the theory and definitions around them.

A weekly engineering study routine

  • After each lecture: a few short questions on the new concepts, from memory.
  • Problem sets: attempt each problem fully before checking anything; mark where you got stuck.
  • Twice a week: a mixed set of problems from earlier topics.
  • Weekly: redo the problems you got wrong, without the solution.
  • Before exams: past papers under timed conditions. Our guide to using past papers shows how to review them.

Frequently asked questions

How many hours a day should an engineering student study?

There is no research-backed number. Regular sessions spread across the week, with most time spent attempting problems, matter more than total hours.

Is it bad to look at the solution when stuck?

Not if you have made a real attempt first. Read only enough to get unstuck, then close it and finish yourself. Redo the problem from scratch later.

Should I learn the theory or just practise problems?

Both. Problems build the skill, and theory lets you handle the unfamiliar twists exams include. Short self-tests on concepts are a quick way to keep the theory sharp.

Sources

  1. Freeman, S., Eddy, S. L., McDonough, M., Smith, M. K., Okoroafor, N., Jordt, H., & Wenderoth, M. P. (2014). Active learning increases student performance in science, engineering, and mathematics. Proceedings of the National Academy of Sciences, 111, 8410–8415. doi.org/10.1073/pnas.1319030111
  2. Sweller, J., & Cooper, G. A. (1985). The use of worked examples as a substitute for problem solving in learning algebra. Cognition and Instruction, 2, 59–89. doi.org/10.1207/s1532690xci0201_3
  3. Rohrer, D., & Taylor, K. (2007). The shuffling of mathematics problems improves learning. Instructional Science, 35, 481–498. doi.org/10.1007/s11251-007-9015-8
  4. Stanford University Center for Teaching and Learning. Top 10 misguided study techniques. ctl.stanford.edu

Turn your notes into practice questions

Drop a PDF, slides or a YouTube lecture into Ace and get practice questions checked against your own material — then play them solo or against a friend.

Try Ace free